frisouille
French menber
Hello Friends,
I'm actually recapping my pc-4002m. The in circuit board and the two main boards are finished. So when i'd check the bias (set ok) end dc offset, one channel have high offset.; The SM give 0-20mv per channel. Mine have 5.3mv on the left and 245mv on the right channel. What do you advise to check?
Thanks for your help.
I'm actually recapping my pc-4002m. The in circuit board and the two main boards are finished. So when i'd check the bias (set ok) end dc offset, one channel have high offset.; The SM give 0-20mv per channel. Mine have 5.3mv on the left and 245mv on the right channel. What do you advise to check?
Thanks for your help.