petehall347
the brandy coffee man
so pin 3 is now positive 31v ?
Yes, that is correct.so pin 3 is now positive 31v ?
Thanks Pete, that is interesting, since those are the new ones I put in. Would you suggest I replace them? Is it possible the 992s I put in there are not exact replacements for the 726?looks like the problem ls around q1 q2 then .
OK, here are the readings:voltage readings q1 q3 BCE would be good to see . all reference chassis ground .
On the brown band end I have 12.8 V, on the gold band end I have -1.5 V.what voltages are at each side of r13 ?
It started out low at about 80k, but drifted up, quickly at first then slowed down. After about 2 minutes of measurement it had drifted up to about 104k, and was slowly climbing.see if it still measures in spec at 120k
did you reconnect q5 base ?did you first remove one leg before testing ? if not i suggest to do that .