CR-800

Matt Mincer

Active Member
Hey Guys,

I picked this up today (flickr link below) with the intention of rebuilding it. Everything works well except for the lamps and dirty pots. Are there any known problem areas I need to be aware of or any "must do's" on this thing? I saw one post where the guy recaped the entire tome board. Is it necessary?

Thanks
Matt

https://flic.kr/p/XZVcXj
 
I'm grappling with one right now. Tarnished fuses and bad solder joints are issues that I know of. Some caps operate right on their voltage limit, so be aware of that too.
 
Hey Guys,

I picked this up today (flickr link below) with the intention of rebuilding it. Everything works well except for the lamps and dirty pots. Are there any known problem areas I need to be aware of or any "must do's" on this thing? I saw one post where the guy recaped the entire tome board. Is it necessary?

Thanks
Matt

https://flic.kr/p/XZVcXj
Clean speaker switch and coupler switch. Filter caps are pretty much used up. I found bad cap on power 47uF/80v.
 
Back
Top Bottom