Porkloin
Oscar Heil Groupie
I would be more than happy to contribute to the documenting of this crossover by sending my cheapy LC meter to measure those inductors if Jer is willing to disconnect them from the rest of the system, measure and reconnect.As I recall mine were,... i'd have to look at my crossover but if that's the way they were hooked up, I would say yes.
If you wanted to be sure, you could measure all the values of the components and draw out the schematic, and I'm sure there are a number of people that could help you here to let you know what the impedance should be.
From my knowledge in the past these all had four ohm woofers, the 4 coil cross overs.
If you look at the Zobel, each pack of four resistors, that gives you another four ohms.
Schematics seem to be guarded industry secrets, or, as I suspect in the case of ESS, victims of sloppy record keeping. It would be a worthwhile cause to get them out there in places like digital docs, which is the only place that I know of for the schematic for the project I did last year. It would be a more pragmatic source of information than the chin-stroking musings of sage pretty-boys like yourself