Those connectors are NLA
What is available is
FEMALE SHELLS that are close
the pins are
here is the but.. the spacing on the females are slightly larger.. so 2 pin connectors are ok but to do a 3 = a 2 +1
Ive never had to look for males since they were left in the board (s)
Clues on Molex replacement connectors: ( scroll down a bit )
http://audiokarma.org/forums/index.php?threads/au-9900-pcb-connector-blocks.398717/#post-9626896
Note I get the larger ones 8 or 10 pin and cut em down with an air cutoff wheel and a REALLY thin disc .040
Be back ~ 1 hr... got some " Honey-Doo's " to do!
Your other option is watch E bay auctions, I have seen internal Sansei harnesses being parted out the AU-717 uses similar connectors... I'm here now
Your stuff, your call
Your stuff, your call
I think we left off here
Test TR 11 & 16??
Passive test: 2508 #2
TEST TR 12 & 15
R-33,34 ( THAT 1 K IN THAT LADDER MARKED R-24 ) R-35
Back in 10 ( pest feeding time )