The test points makes the reinstallation simple. Just slip the wires onto the posts, tack them down and your done.
Are you using something like this?
Tony
The test points makes the reinstallation simple. Just slip the wires onto the posts, tack them down and your done.
Are you using something like this?
Tony
OK. Should have Googled first. I'll bet it was something like this. Right? https://www.bradyid.com/en-us/product/m21-125-c-342?catid=wbn_50174
Awesome! I think I just started my Christmas wish list.
Bought a label printer like you have posted. It is awesome! Can do more than just print wire labels.
Instructions for service manual:
Symptom: No stereo separation.
first check that the mode switch is in the normal 2ch position ...
... check that the stereo headlamp is on or not, check the 19khz JCH10 output signal using an oscilloscope and a frequency counter if it is not connected.
Can you check the VDCs on HA1156? This IC may be the cause of the problem.