vintagejapan
AK Member
Good, then please send me the "garbage"
See what will be left over!
Good, then please send me the "garbage"
Yeah, Sanken, Tokin, whatever is called....Toss 'em in a doggy bag for me.
See what will be left over!
I'll take 4 please
WOOW! how can a B-1 brother get a scanned copy of that?
I think I will replace them just for piece of mind.
Here is the B-1, I will strip everything.
If you're really interested send me a PM.I'll take 4 please
Thanks, but I already have the manual. What Vint Age shared is a flier.This is also a great copy: http://sportsbil.com/yamaha/b-1-om.pdf
I was gonna say..
Yes that is the way to go. That is what I did with my unit for the Quickie, albeit, I would not call it a full rebuild.
The next B-1 I will do 'll be my Hot-Rod B-1 with silver front plate. That will be a full rebuild. I plan on eliminating all but two of the relays, by pass all input switches and the rumble filter, new speaker posts, a proper power cord for 1kVA and I even found a good cleaning "solution" for all board edge-connectors
View attachment 1083015
Yes I know Let me know if you also want a high-res digital copy of the B-2 flyer (German unfortunately) or the NS-2000 flyer (English).Thanks, but I already have the manual. What Vint Age shared is a flier.
Do you have it in higher resolution?
I want it!Yes I know Let me know if you also want a high-res digital copy of the B-2 flyer (German unfortunately) or the NS-2000 flyer (English).
I have the original B-2 flyer in English. I can shareYes I know Let me know if you also want a high-res digital copy of the B-2 flyer (German unfortunately) or the NS-2000 flyer (English).
I have the original B-2 flyer in English. I can share
I want it!
I have the original B-2 flyer in English. I can share
Yes please.NS-2000?
continued...
View attachment 1064080 View attachment 1064082
here I committed the ultimate sin by a certain someone's standard in terms of replacement components choice....I promise to repent
also...ran out of silver heatsinks so I went to black instead.
View attachment 1064095 View attachment 1064098
View attachment 1064102
on the driver boards I will replace all carbon resistors and ALL caps. I found some of the R&Cs way out of spec. I already started the process.Waiting for parts...
Other changes I did so far was to replace all known trouble maker semis such as the 2sc 458s on the PSU boards and the 2sa810s on the driver boards.