gdmoore28
Super Member
Well, there is no point whatsoever in installing the glass fuses because they have been bypassed internally. The only way to utilize the glass fuses is to undo the bypass. Not hard to do, you will just need to remove the crossovers and reverse the changes that the PO made to them. If you intend to reintegrate the glass fuses, don't forget to order new fuse holder caps when you talk to Parts Express. They carry them. It would be very helpful to your helpers here if you posted very clear closeups of the crossover network.
My guess is that the guys here are exactly right about the polyswitches being the problem. They are defective and are not allowing the tweets to tweet. And I'll further wager that you have been listening to them this way all along, but didn't realize it. Happens to the best of us.
Just for your peace of mind, I'd take the cover off the APM200 power meters and take a peek inside. Make sure it hasn't been fiddled with and has no obvious problems.
That's my useless 2 cents worth.
GeeDeeEmm
My guess is that the guys here are exactly right about the polyswitches being the problem. They are defective and are not allowing the tweets to tweet. And I'll further wager that you have been listening to them this way all along, but didn't realize it. Happens to the best of us.
Just for your peace of mind, I'd take the cover off the APM200 power meters and take a peek inside. Make sure it hasn't been fiddled with and has no obvious problems.
That's my useless 2 cents worth.
GeeDeeEmm