silverHalo
Member
For all those current and future 5000 owners! I recreated the printed circuit board for the F-6013 driver amp board. I have made a .PDF of the PCB with component placement and parts list so those who are so inclined, can make there own. If you have an old 5000 or 5000a that still have the older F-1040 boards you can now upgrade to the F-6013 with a bit of time and patience.
This PCB image is set up for toner transfer board etching (reversed image), and the component side set up regular for silkscreening or transparent sticker printing on the reverse (non-copper) side.
This link will be permanent for those who find this forum in the future to use.. good luck and happy etching.
http://www.robertreznik.com/sansui/sansui.html
This PCB image is set up for toner transfer board etching (reversed image), and the component side set up regular for silkscreening or transparent sticker printing on the reverse (non-copper) side.
This link will be permanent for those who find this forum in the future to use.. good luck and happy etching.
http://www.robertreznik.com/sansui/sansui.html