I had my media album viewing privilages set to "owner only". That must be the default.
Can you see the pics now?
Can you see the pics now?
I love it.How do you like the YPC-1?
I love it.
It's critical that the output impedance of the YPC-1 (10k ohm) is a good match for the input impedance of the amplifier. While it works very well with the M-2 the best match I've found is with the B-1 which has an input impedance of 100k ohm.
New just come....
- Tuner T-S1000
- New Wood for A-S3000 ....now it's look nice
yes they couldCongratulations on the C-1 (and B-1) Vint Age! They couldn't be in better hands.
New just come....
- Tuner T-S1000
- New Wood for A-S3000 ....now it's look nice
I wouldn't mind getting a CA-1010 or 2010 but their prices have been raised a lot recently.
just picked up this Yamaha C-2x
View attachment 1135197
View attachment 1135198
View attachment 1135199
View attachment 1135200
View attachment 1135201
The final refinement of the Yamaha benchmark C-2 and C-2a preamplifiers is the C-2x.
Special composite PCBs for all circuits. All wires including power chord are oxygen free copper. Gold plated brass RCA terminals.
Independent power supplies for the input and output sections. Independently shielded. Eight 4,700 uf power filter capacitors.
Low distortion, 0db, amplifier for all high level inputs. 2.2 M-ohm input impedance for DAD input. Independently shielded.
Low distortion, 0db, low impedance output amplifier. Independently shielded. High enough output to drive headphones to 6V/100 ohms (very nice headphone amp!). Four gang volume control and precise, ultra clean, high quality tone controls. 20hz to 20khz at 3v .001% THD. Maximum output 10v, 20hz to 20khz at 1% THD. 106db SNR. 90db channel separation at 0db.
A pair of high gm, low noise, FETs in parallel for phono equalizer with DC servo amplifier. The MC head amplifier has sixteen super low noise, complimentary paralleled, transistors. Phono circuit is independently shielded. 86db/85.5 S/N ratio, RIAA 20hz to 20khz +/- .2db. 94db/100db SNR. 76db/86db channel separation at 0db.
Just checked it out per SM and no adjustments needed. Totally clean inside and out with no signs of stress.This is the second C-2x I’ve owned. It really is a very, very fine and timeless preamplifier. It has a totally quiet and black background no matter what the volume setting. I also owned a C-2 for a while which is a fine preamplifier but not near the same performance level as the C-2x. The MC phono stage in particular is exceptional IMHO. The feel of quality to the controls and total operation is very high. Not sure how they get all 18 lbs of it all in such a small case?