Round are air-core inductors.Whats the difference between the round and square inductors?
Rounds are .30mh
Square are 2.5mh
You mean 25uf?Ok so if i cant find a 25uh should i combine a 10 and 15?
Ditto.As for wire gauge--I doubt you would gain anything,
The levels won't be adjustable if you build the crossovers without the L-pads. Are the originals damaged?I'm building a parts list. Everything is basic, just will have to combine a 10 and 15 cap to get the 25uf I need. Now i'm stuck on the L pads. They are Ohmite 0110 Model E 50 Ohm .5 Amp Rheostats. There are no markings regarding watts. Are these the same as L-Pads? In my 3 way set up they are for the tweeter and woofer. If looking at the picture the tweeter L pad is on the left and woofer on the right. Will it make a difference if I build the crossovers without the L pads?
The DC resistance of the level potentiometers has nothing to do with the impedance of the speakers.Ya im stumped. Hours of searching, joining forums and still cant figure it out. Why would you need a 50 ohm when the speakers are 8 ohm?