Fiddler1-5
New Member
I've been digging around here reading up about protection mode Issues for KR9600's. I'm hoping to have eliminated both TA-200W as the issue. Here are the voltages from the relay board pins:
1 .6mv
2 -1mv
3 16.5mv
4 11mv
5 69.4v
6 .067v
7 -9.53v
8 -1.59v
9 7.66VAC
I have the Service manual as well and also followed the trouble shooting tree and checked voltages at Qk11-14 14.
(B | C | E)
Qk11 1.3 | 0 | .6
Qk12 .165 | 19.5 | 0
Qk13 .642 | .034 | 0
Qk14 68.5 | 69 | 69.1
any help would be much appreciated.
1 .6mv
2 -1mv
3 16.5mv
4 11mv
5 69.4v
6 .067v
7 -9.53v
8 -1.59v
9 7.66VAC
I have the Service manual as well and also followed the trouble shooting tree and checked voltages at Qk11-14 14.
(B | C | E)
Qk11 1.3 | 0 | .6
Qk12 .165 | 19.5 | 0
Qk13 .642 | .034 | 0
Qk14 68.5 | 69 | 69.1
any help would be much appreciated.