Hi Jake,
There are a few folks around Indy that get together every now and then. I see this is your first post on AK. Why don't you introduce yourself and tell us a little bit about your audio interests and your current setup...
Hey Guys,
I've only been in Indy for about 2 years, but I have made the pilgrimage to Getchell's a few times already.
Actually I've been meaning to take a few old pre-amps up there for Bobby to look at.
My current project is to restore an old pair of HPM-100's I got from my dad. About half the speakers are toast so it's more of a scavenger hunt to fix it on a reasonable budget.
My system:
Preamp: Emotiva UMC-1
Power Amp: Emotiva XPA-2 2nd Gen
Speakers: Tekton Pendragon (8 Ohm)
Digital Source: Tidal via Chromecast or via HDMI on my Macbook pro (if I'm feeling fancy)
Analog Sources: Teac X1000R Reel to Reel, Technics SL-D2 turntable with Stanton 881S Cartridge and needle, and a Yamaha K-1000 Cassette Deck
All my analog stuff runs through my processors since all my tapes are encoded with DBX I or II.
Processors: BSR EQ-3000 Equalizer, DBX 3BX series two 3 band dynamic range expander, DBX 224 Type II noise reduction system (for DBX II tapes)
Other: Emotiva XPS-1 Phono preamp (since my UMC-1 doesn't have a phono section)
What are you guys rockin with?