musichal
poet emeritus
Just to be on the safe side, and satisfy my slight (or somewhat more) OCDness, I would likely build something like this, just in case the transmitter was set to 15 watts by mistake.
View attachment 1227934
The resistor values are for a 50 Ohm impedance rather than 75 Ohms, but the idea is the same.
The resistor values can be calculated for 75 Ohms.
Inserted between antenna and transmitter, I guess?
I see it attenuates from 15w to 1.5w. Does it then attenuate 1.9w to 0.19w? The transmitter offers output adjustment in 1.9 increments. 3.8 becomes 0.38? 5.7, 0.57? & etc?
If so, that could be a very helpful circuit to dial in just the right low-power setting needed.