I received some good advice here on the forum once before. I was directed to replace my 2sc726 and 2sc1313 transistors and all was good until it wasn't.
I got the magic smoke.
So I replaced the burnt resistors that I saw. I replaced the bias transistors with paired ksa992's. I also went ahead and did a 99 percent recap. I didn't replace the large filter caps.
Right now I only turn it on with the dim bulb tester. When I power up the bulb wont turn on at all. The red power light on the front of the amp lights up but the relay wont click. I have not even attempted to hook up speakers yet.
Any tips on where to go next?
I got the magic smoke.
So I replaced the burnt resistors that I saw. I replaced the bias transistors with paired ksa992's. I also went ahead and did a 99 percent recap. I didn't replace the large filter caps.
Right now I only turn it on with the dim bulb tester. When I power up the bulb wont turn on at all. The red power light on the front of the amp lights up but the relay wont click. I have not even attempted to hook up speakers yet.
Any tips on where to go next?