Natertots
Well-Known Member
I am looking for advice on how best to refinish/repair what appears to be some water damage to some Kappa 6.1 series II’s I picked up a while back. I have done some searching and the advice I have found is to hand sand with 300 grit and use Howard's Restorafinish Golden Oak to refinish. This approached worked well for the OP of that thread, but the cabinet damage was some fading, not darkening of the veneer like mine.
Are there any other suggestions on how to approach the marks on these cabinets? I appreciate any advice or suggestions ya’ll may have. Thanks!
P.S. The last picture is only some scratching and paint on the cabinet. I feel like I have a better grasp of how to deal with this, but any suggestions specific to this finish/veneer are greatly appreciated.
Are there any other suggestions on how to approach the marks on these cabinets? I appreciate any advice or suggestions ya’ll may have. Thanks!
P.S. The last picture is only some scratching and paint on the cabinet. I feel like I have a better grasp of how to deal with this, but any suggestions specific to this finish/veneer are greatly appreciated.