RayN
Active Member
I recently purchased an AS-IS MX-1000 from the bay for a project. Other than being very dirty and bent, along with some loose connections on the speaker outputs, it worked! I spent some time cleaning it and bending it back into shape, the last thing I needed to do was replace some of the bulbs for the meter. Unfortunately when I was putting the front meter assembly back on I temporarily removed the main power leads coming from the transformers for access to the connectors for the front panel. When I replaced them I accidentally installed one of them offset by one pin. Now the system won't power on, however, I saw no smoke and smelled nothing burning. I hear a relay kick when I press the power button but both the power and protection lamps are dark. Help! I feel like a complete idiot.
The fuses seem fine so I suspect the power supply. I'm comfortable replacing parts and I have the schematic, just hoping someone can help me jumpstart the process.
Thanks
The fuses seem fine so I suspect the power supply. I'm comfortable replacing parts and I have the schematic, just hoping someone can help me jumpstart the process.
Thanks