Vaylo
New Member
Hello guys,
time has come to replace one of the filter caps in my tuner and amplifier. Please see below scheme from the service manual, it's marked C901.
My expectation would be to place an X2 cap here but when i look at the existing cap there's a 'Y' letter stamped on it, which confuses me as then I would expect one of the leads to be connected to the ground rather than to a transformer:
It's RIFA, type PME265MB510, unfortunately I cannot find any datasheet for it to be sure whether it's an X or Y.
In case it's an X-type would this be a correct replacement?
https://www.tme.eu/en/details/mkpx2...olypropylene-capacitors/kemet/r46ki21005001m/
Many thanks in advance for your help.
time has come to replace one of the filter caps in my tuner and amplifier. Please see below scheme from the service manual, it's marked C901.
My expectation would be to place an X2 cap here but when i look at the existing cap there's a 'Y' letter stamped on it, which confuses me as then I would expect one of the leads to be connected to the ground rather than to a transformer:
It's RIFA, type PME265MB510, unfortunately I cannot find any datasheet for it to be sure whether it's an X or Y.
In case it's an X-type would this be a correct replacement?
https://www.tme.eu/en/details/mkpx2...olypropylene-capacitors/kemet/r46ki21005001m/
Many thanks in advance for your help.