billy_berrou
New Member
Hi,
I have a C4 pre (with the dual stereo outputs) and I have an M2 Amplifier and two M4 amps so what I would like to do is hook up the M2 to one of the stereo outputs of the C4 and then run the two M4s as monoblocks (right and left) from the other C4 stereo output.
This should give me about 1000 watts of vintage Yamaha sound!!
Problem is, I've looked everywhere and cannot find any information on how to bridge the M4s.
Does anyone have any information on how to accomplish this?
[I also have the T1 tuner and the K2000 cassette deck so this is one sweet setup; now if only I had a couple of pair of NS1000M monitors to go along with it...]
I have a C4 pre (with the dual stereo outputs) and I have an M2 Amplifier and two M4 amps so what I would like to do is hook up the M2 to one of the stereo outputs of the C4 and then run the two M4s as monoblocks (right and left) from the other C4 stereo output.
This should give me about 1000 watts of vintage Yamaha sound!!
Problem is, I've looked everywhere and cannot find any information on how to bridge the M4s.
Does anyone have any information on how to accomplish this?
[I also have the T1 tuner and the K2000 cassette deck so this is one sweet setup; now if only I had a couple of pair of NS1000M monitors to go along with it...]