Give me a list of what you need and speak remedial to me; won't hurt my feelings.
And, I just looked at the speaker terminal board and my tech told me that mine is in bad shape; one of the worst parts of the unit. I would look for that part number in the service manual for Model Eleven G/GX, 11000G, and Super Eleven. Many of those parts interchange with each other; that's how I found out the 8010 part number for the power switch would work with My Eleven G.
I have a very dirty 8010. Tried to have it serviced but too far gone. I just pulled the power switch as it has the same part number for my Model Eleven G. My tech guy said the amps are good. I just opened it up and there are lots of good parts. The front end looks pretty good. I think all the switches are operational. But, gotta say that I know nothing about the electronics or how to test a board. If you can take a photo and point to the exact parts you need, I'll try to get them to you. The best I can do is unscrew, unbolt and cut wires. You will just have to give me guidance via photos and videos of what you need. I'm shocked that so many Kenwood parts cross over to other models. I've been looking for a power switch for my Model Eleven G for weeks and had one the entire time.
Vincent
Is this what you need?Hi Vincent:
Just came along this thread and am beginning to look for a replacement antenna block panel for a Kenwood Super Eleven receiver I am repairing. Thought I would look around some before trying to fabricate something. It looks like the service manual has a part number of E29-0082-05. It is the entire panel with the antenna terminals attached. Mine was cracked up pretty good. Thanks for any input. Pat
That is a photo of an eBay item for sale matching your part number. If that is what you need, I’ll pull my unit out this weekend and see what mine looks like and get it to you.Is this what you need?
That's the part, thank you. Let me know if that is what you have. Thanks! Have a great week!That is a photo of an eBay item for sale matching your part number. If that is what you need, I’ll pull my unit out this weekend and see what mine looks like and get it to you.
Vincent
It looks like the service manual has a part number of E29-0082-05. It is the entire panel with the antenna terminals attached. Mine was cracked up pretty good. Thanks for any input. Pat
It looks like the part on my 8010 is very different than the part you need. You be the judge? See attached photo of mine.That's the part, thank you. Let me know if that is what you have. Thanks! Have a great week!
That is part I am looking for. Were you able to check and see if you have one you can spare?That is a photo of an eBay item for sale matching your part number. If that is what you need, I’ll pull my unit out this weekend and see what mine looks like and get it to you.
Vincent
Thank you Vincent, you are correct, it will not work. Thank you for looking.It looks like the part on my 8010 is very different than the part you need. You be the judge? See attached photo of mine.