SX-636 Repair Help

Yeah, I checked their datasheet and aligned the transistors with the diagram printed on the PCB before soldering.
Good..Can you post a photo of your main filter caps? Both topside and bottom side?
 
Are you seeing -41vdc on pin 10 of the AWR-060 power supply board?
 
upload_2019-1-11_21-21-28.jpeg



D5 and D6 Soldered to the amplifier board and screw mounted to the heatsink.
 
Happy hunting. I have no more suggestions until we know the condition of all the transistors on the amplifier board.

No problem, thanks for all the help. Fortunately there's not too many of them so I'll post here as soon as I have new info.
 
Back
Top Bottom