musicman95
Member
So this is the first time I'v ever recapped a speaker. Hadn't listened to them in a while because they were ear bleedingly bright, then someone told me that I should recap them because that might be the cause. When i went to open up the x-over there was no slack in the wires to pull it out more than an inch. I then pulled out the 10" driver to get to it and noticed that theres a fair mount of glue holding the x-over down. I stopped there for fear of breaking something. Any advice on how to get that out of there?? Also when I'm done do I need to put a sealant down around the driver?? Also is there any particular way I should put the insulation back in there? I'v read that pushing it back to give it some room is a good idea. Lastly do I need to replace all 6 caps? Or just the ones for the polydome and emit?
Attachments
-
20160215_215137.jpg63.8 KB · Views: 108
-
20160215_215120.jpg67.9 KB · Views: 97
-
20160215_215038.jpg45.6 KB · Views: 97
-
20160215_215106.jpg55.1 KB · Views: 88
-
20160215_214948.jpg56.8 KB · Views: 93
-
20160215_215016.jpg63.1 KB · Views: 94
-
20160215_214943.jpg50.1 KB · Views: 94
-
infinity_rs-6_kappa_150w_speaker_system_sm.pdf_1.png185.7 KB · Views: 90