Recent content by adrian78m

  1. adrian78m

    Just picked up a JVC/Nivico SRP-471E-5

    Managed to rewire the tone arm, and the table works great. Sounds amazing.
  2. adrian78m

    Just picked up a JVC/Nivico SRP-471E-5

    Maybe this? https://www.needledoctor.com/JVC-DT29-Stylus
  3. adrian78m

    Just picked up a JVC/Nivico SRP-471E-5

    Anyone know what stylus this table takes?
  4. adrian78m

    Just picked up a JVC/Nivico SRP-471E-5

    Even the motor mounts are still good, which I hear is a common problem with these.
  5. adrian78m

    Just picked up a JVC/Nivico SRP-471E-5

    Stopped into our local thrift store to see if there were any goodies, and walked out with a JVC/Nivico SRP-471E-5, for $10. The motor works, as well as speed changer. The tone arm looks good. Even the cartridge looks ok. A few issues though: - It does not turn off - starts spinning as soon...
  6. adrian78m

    Pioneer SX-939 Recap

    Well I did all I could do with it, and finally sent it out to a pro to be fully restored. Still waiting to get it back.
  7. adrian78m

    Pioneer SX-939 Recap

    Is the DBT a must have? I do have the parts for it already, just wondering if it is needed. I was already leery about touching anything on the tuner board, which is why I haven't.
  8. adrian78m

    Pioneer SX-939 Recap

    Many thanks larry and rcs! Lots of good info. I need more info on how to check/adjust the offset and bias. I am assuming these settings are performed on the 4 pots on the power amp, according to page 19 of the service manual? (using 25mV, instead of the written 50mV). What is a DBT? I'm going...
  9. adrian78m

    Pioneer SX-939 Recap

    Didn't replace the 313's, but the list I got from tsd71 says to use Mouser 512-KSC2073TU.
  10. adrian78m

    Pioneer SX-939 Recap

    Some pics of the recap process:
  11. adrian78m

    Pioneer SX-939 Recap

    Took me a few days, but here's what I've done so far: - Replaced all electrolytic caps on all boards except those on the tuner board, and the big filter caps - Replaced the 2SC1384 on the protection board with a 512-KSC2690AYS - Replaced the heat-sinked 2sc1451's on the power supply board -...
  12. adrian78m

    Pioneer SX-939 Recap

    Looking at the following for filter caps: http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=223333633&uq=636260363775912531 or http://www.digikey.com/scripts/DkSearch/dksus.dll?Detail&itemSeq=223333635&uq=636260363775912531 Only difference is the ripple current rating. One is...
  13. adrian78m

    Pioneer SX-939 Recap

    So, my order of caps came in today. All good except for the filter caps. Now I've got these huge things that I don't think will work...
  14. adrian78m

    Building replica Large Advent cabinets

    The smell seems to be in the front and back mdf parts, and the foam. The sides and top/bottom are solid wood and don't seem to be affected as much. I really just want to build new though. I like a good project.
Back
Top Bottom