Recent content by mhjmhjones

  1. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    I had some time to work on this morning. No luck. Not yet anyway. I connected to Sansui to a different power strip and a different outlet altogether (running an extension cord through the middle of the living room - wife loves). I swapped out the interconnects going from the ZPhono to the...
  2. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    I am going to try this plan of attack. I did a lot of system tweaking - hooking up new components, maybe swapping out interconnects, adding HDMI interconnects around the same time. I can't for the life of me remember when the problem started in relation to when I did all that tweaking.
  3. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    What should I look for in a subsonic filter? Would this one work?: https://www.amazon.com/Harrison-Labs-Inline-Subsonic-Crossover/dp/B00S8XXYHC/ref=sr_1_2?crid=A4MU7H3C2MKL&keywords=subsonic+filter&qid=1643724501&s=electronics&sprefix=subsonic+filter%2Celectronics%2C46&sr=1-2 I am now toying...
  4. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    Good points. I wasn’t sure if there were different relays for multi-room and the main speakers. I don’t even know what a relay is to be honest. I was just thinking about it - we haven’t ruled out that the problem could be a subsonic noise issue with the turntable. No idea what to do about that...
  5. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    I was aware that only analog sources can be used for multi-room. I used the Parasound in this configuration for a few years with no issue. I always believed that I can only use the analog inputs as opposed to the HDMI inputs or the optical/coax digital inputs. I have a feeling something is...
  6. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    I have a Sansui Au-888 powering 4 ohm AR-3a speakers in zone 2. There is “Multi-room & Source” RCA analog output on the pioneer. It feeds the Sansui through a decent interconnect going into the Sansui’s Aux input. I bought the Sansui from a man who at one time had the goal of owning “every...
  7. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    I have figured out that the problem only occurs when the second zone is on. I just played Welcome to the Machine in zone 1 (advents powered by the pioneer) and the problem did not happen. I think when I initially thought I had solved the problem it was because I was playing the music in zone...
  8. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    Why yes, the Pioneer is plugged into a Sears power strip (an older, metal type) with six outlets. The other 5 are used for the Sansui, the ZPhono, a Bluetooth receiver, the SACD, and the bluray player. I am outlet challenged in this old house. I'll plug a photo in here. in a minute. Oh wait...
  9. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    OK Tried that. I think you're right about something being amiss! I connected to the CDR/TAPE/MD input and selected PURE DIRECT - still happens. An interesting development is that when it happens, I just noticed the screen on the front very briefly says "err" and then it switched to STREAM...
  10. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    Well, I connected to both the CD input (which I use for my CD) and the CDR/Tape/MD input and it happened on both inputs. There is a sound effect that happens twice at the beginning of Welcome to the Machine that triggers the problem faithfully (the sound occurs twice in the intro right before...
  11. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    More or less around the same time but I tinkered with a lot of other stuff around that time (Christmas holiday). But earlier today, I put the old stylus back on and the issue persisted. I also started using an ultrasonic cleaner (using a mix of wetting agents, etc. I got from a discussion on...
  12. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    Best I can do (I think) is the CDR/Tape/MD input. I don't have an AUX input.
  13. mhjmhjones

    Turntable (or something) has started tripping a relay (assumed) in my receiver when the needle drops

    I will try that. I've had it hooked up this way for several years and the problem just started a few weeks ago. But I'm willing to try! I'm really hoping this can remain a DIY project.
Back
Top Bottom