1. Rest in Peace Paul (Kegger) If you would like to help the family in this time of great sorrow and need, you may donate on their GoFundme page: https://www.gofundme.com/mckechnie-medical-and-funeral-fund?
    Dismiss Notice
TerryS
Last Activity:
Jun 22, 2017 at 9:05 AM
Joined:
Nov 18, 2008
Messages:
1,049
Likes Received:
17
Trophy Points:
38
Location:
Peyton, Colorado
Occupation:
Electrical Engineer

Share This Page

TerryS

AK Subscriber, from Peyton, Colorado

Subscriber
TerryS was last seen:
Jun 22, 2017 at 9:05 AM
    1. Kahoona
      Kahoona
      ;-) Never mind... I found a bias posting on TNT that helped me out and got them adjusted. I can't seem to get the left chan DC lower than 30 now that the bias is set. set. I set the bias to 15 (thus 30 for both). I also tried 25 (50 for both) but no difference. I am going to test the VR's if I can remember how and probably order new better ones if I can figure out what to order. Any advice would be appreciated.
    2. Kahoona
      Kahoona
    3. emat86
      emat86
      Hi Terry, I was going back to have a look at something in a thread I started a while back (http://www.audiokarma.org/forums/showthread.php?t=561222) and noticed that I failed to reply to your last helpful post in it (must have messed something up in my email alerts). Just thought I'd apologise for that, and thank you again for your help that time!
    4. noexit
      noexit
      Terry,
      I saw your post (http://audiokarma.org/forums/showthread.php?t=253171) where you were looking for a switchbox that allowed switching of sorts... Did you ever find one? I'm looking for one similar. I have an old tape dubbing switchbox that I picked up at a yard sale years ago that has worked well for me for some time but is now somewhat damaged. I use it to play audio from a Media Computer throughout my house. I have amps in each room and send line level signal to the tape in or CD in of the amps. I use the switchbox to control which rooms get the signal. Basically it is designed to allow dubbing to 4 tape decks from a single amp. It has lines in and out to and from a given source to, potentially, 4 tape decks. I haven't, to this point, found a replacement and am considering building one myself using this old one as a template. Your experience is appreciated.
      Michael
      noexit2000@gmail.com
      803-386-9353
      Columbia, SC
    5. autoteck1
      autoteck1
      I have the service manual for the da-a15dc in german allso,, I think i uploaded it to the data base here and on another sight, I need it for the da-a15,, it is differant
      Jim
  • Loading...
  • Loading...
  • About

    Location:
    Peyton, Colorado
    Occupation:
    Electrical Engineer
    Audio, Astronomy, Motorcycles