Recent content by texan49

All good information, thanks everyone.

I'll pass the information onto the new owner, Thanks.

Thanks for the information, it has a finger push button switch that is wired to turn the pump on and off. I'm not sure about the plastic thing, would it be used as some type of filter ? It has a nipple at the top for in and out.

Anybody use something like this for removing solder from a board ? I found it at a estate sale, not really sure of how to put it all together. Thanks for any help.

A little over a foot of Snow last night, minus 8 tonight, Springs right around the corner.....

OK, I have -34.1VDC and -33.5VDC on the emitter output transistor cases in order -1VDC +33.5VDC +34.6VDC 0VDC It appears that in this quasi-complimentery output transistor configuration that all the output transistors check out good. Any further measurements I can make ? Thanks for...

How do I check for the -33VDC on the emitter, with the transistor cases mounted ? Since I had 34.9VDC on two of the out transistor cases, and 1.005VDC and .013VDC on the other, do you think they are good ?

Since I don't have the 33 vdc on all four output collectors, I'll order the four new ones. What is the sealant that's under them, and should I apply more ? Thank You avionic for your help, getting me to this point.

Thanks to A23gt for bringing avionic to the rescue, AudioKarma is the best.

From Lt. too Rt. 1.005 34.9 34.9 .013 DC

Do you just touch the back of the transistor case, with the unit powered up ?

RT. to fuse .20 DC LT. to fuse .0 DC RT. to speaker output .20DC LT. to speaker .0 DC Speaker set to side A RT 3.8 ohms LT .7 ohms Set to side B RT 1.3 ohms LT 8.7 ohms

OK, I'll give it a try and report back, Thanks.

I'm thinking of installing new capacitors in the preamp board, and power supply board, none of them look bulged or leaking, but 40 some years old. I don't think I'll have to replace the 2 large 4700 uf 35v. , or should they be replaced also ? I made my list with , looks like 25 capacitors, and...

Using headphones Rt. channel is still weak. Fuse is good, and cleaned it with deoxit, no change.