ringading
Well-Known Member
I am replacing the caps on the main amp board and clipped one of these small purple parts severing one of the leads.
There is no part number on the board or in the SM. It is indicated by a dashed line only on the board and in the SM. Is it just a jumper to get across some of the traces? If so I can just replace it with a small piece of insulated wire.
There is no part number on the board or in the SM. It is indicated by a dashed line only on the board and in the SM. Is it just a jumper to get across some of the traces? If so I can just replace it with a small piece of insulated wire.