I will go check it out right now.
C-03 / 04 are still part of the unregulated +/- 68 volt PS.. I'm not understanding your point
Mike you said this...
"The big caps were +62. 6 VDC and -62.4 VDC.
The 65 volt section was +67.7 VDC on pin 3 and -62.5 VDC. "
notice the 2 neg voltages are bang on.. i think you are taking the board ( 2512 ) measurements in the wrong place....
The traces marked +/- 60 lead back to the BIG CAPS and have NOTHING to do with the reg board...
MIke tell me the voltages you get with 2508#2 using the +/- 65 as outlined.