Kr6600 no power

Oscar23

Active Member
I have a kenwood kr6600 with no power. I found one fuse the 5 amp is still intact.I can't find the other one.
 
Nothing at all

More info would be helpful.

Did it work and then quit or did you get it in this condition? Did you jumper the power switch? Did you test the fuses with a meter? (I don't trust my eyesight)
 
More info would be helpful.

Did it work and then quit or did you get it in this condition? Did you jumper the power switch? Did you test the fuses with a meter? (I don't trust my eyesight)
OK yes that was rather vague I tested both fuses with a meter I have not jumped the power switch yet 120 vac waiting for the kids to go to bed my little guy is very interested. I got the reciever in this condition.
 
OK I jumped the power switch the lights don't come on but it does come out protection. So it is alive there is I'm pretty sure other issues than the switch. I'm going to try connecting everything to the other side of the switch.
 
If it comes out of protection it sounds like its working. You want to check for audio output on both channels next
 
Back
Top Bottom