Something else I noticed my table doesn’t seem to have the wafer to keep the plunger from going in to far, should I get one?
The way my cam is attached it never clears the button on the power switch
I did move the switch but it still always makes contact with the cam
Nothing like the separation from your photo
I’ll try that, maybe the button is stuck
It appears that my switch is connected to the pressure for the idler wheel, when I listen the cam it want budge but is I losen the hex nut it moves easily
"2. The small red capacitor is only for arc suppression so a "pop" is not heard in the audio, so we can disregard it for now."
If that cap is shorted, the table will stay on. My Rek-O-Kut had that exact thing happen, so maybe don't disregard it for now. You can de-solder or cut one lead of the cap to confirm if it s the problem.