1/4" TRS to Dual RCA Stereo Splitter Cable Request

Go on the bay and look for what you want in the Monoprice Premium line of cables. These are very nice, especially for the $$$ (lots of bang for the buck) and many here prefer them.
 
RCA Jack To 1/4" Mono Plug Adapter
https://www.ebay.com/itm/6x-6-35mm-...h=item1a47966160:g:ejAAAOSw44BYa22I:rk:3:pf:0
JEWcZc9.jpg
 
RCA Jack To 1/4" Mono Plug Adapter
The TRS ¼" phone plug is a stereo plug so these aren't what the OP is looking for. Additionally, it will put another connector in the path, something that may or may not be acceptable. I prefer to use a cable with proper ends and avoid adapters for longer term installations. Adapters are fine for testing.
 
Buy a 2 meter RCA cable cut the connectors off one end and solder on a TRS phone plug, Takes about 5 minutes after the solder iron is hot. maybe 2 minutes if you have experience.
 
GW: Are you sure, that's actually what you need? No offence meant, just wondering - because on a "vintage mono tube amp" I'd merely expect a mono input...

Greetings from Munich!

Manfred / lini
 
Back
Top Bottom