DMathews

i just posted a diagram so you understand the circuit

hello there .
sorry my inbox was full .please resend message .

SX 636 recap help ref- AWR060 -blown fuses
I have replaced the 6800 uF/35V power cap with Nichicon LGU1H682MELC 6800uF/50V high ripple current type and changed out the bridge diodes (SR3AM) with 1N5404 high surge current devices. I am now blowing the 5 amp fused on the 31 volt line to the power amp. Should I be changing the fuses to delayed type or to a higher value. . . or am I missing something?

Any help will be appreciated.