I noticed in a long ago post you had a Marantz 2500 user manual you were going to scan. Did you ever scan it? I'd be happy to pay you for your time.
Thanks and Take Care.
Hi I'm in Austin, TX as well and wondering if you sold the ASR-005 replacements? I'm looking to buy a couple and noticed you were local Austin like me.
Do you have the source for the ASR-005 (Pioneer) relay adapter boards? I would like to acquire a supply, but do not want to deplete your stock. They are useful in a lot of other applications, many of which used the obsolete Omron reed relays. I have hand-made breadboards, but it is very time consuming.
Hello good sir
I'm in the process of narrowing down my options for a new screen printed or etched marantz model 18 faceplate inserts.
Was wondering if you still had the blue prints to the 18 for re production that you had the most success with for reproduction .
Any direction on this matter would be greatly appreciated
Thanks again
Nam
Hi Txturbo, I was referred to you by a post I placed in the Marantz forum. I recently purchased a Marantz 2226, 2235b, and a 2245. The 2226 phono section is out, the 2235b needs a good cleaning and going thru, and the 2245 has a bad balance potentiometer. I would like the 2235b restored first. Can you help me with this?
Hi Txturbo, it was recommended that I contact you about my Marantz 250. I am in San Marcos. 250, had been fully serviced. I wired 4 in series. I had 1 wire misplaced and blew the fuse. Removed all wires and the fuse blew. Any local recommends (so I still have arms and legs). Second, I am technically inclined, if I had the right tools, and guidance (from somewhere) would you recommend this?
appreciate your help
Hello TX. I was reading your posts about Marantz 2600 transformer protection. I was wondering if you ever were able to get a workable design for the protection? I have one and I'm going to have some work done on it. I would like the tech to put a protection in place. Thank you, Troy
Hi turbo
I recently read your write up on the three realistic sta180’s you repaired. They look great! I have one I purchased in 1972 that has performed great until last week. Now no am or fm. No signal indication or red tuned in light. Aux 1 works great with my class tape deck. Any idea where to start?
Thanks
Happyapp
Tapplfam@wctc.net
Hi txturbo. About a year ago you posted you had some Marantz Model Eighteen faceplates made. Did they come out well, and do you have any left to sell? Thanks, Grant