Search results

  1. S

    Technics SL-1700

    Hi, so why pollute this thread with ramblings about it ? rgds, sreten.
  2. S

    Technics SL-1700

    Hi. No we don't. Its a P-mount. However there seem to be some other AT112 models. http://www.lpgear.com/product/ATS0112.html which is a 1/2" mount cartridge. Does it look like this ...
  3. S

    Technics SL-1700

    Hi, Fact is without pictures we have no idea what the original cartridge is other than its an AT and what styli options may fit that cartridge. JJ's ramblings with no evidence are not helping at all. Post the relevant AT web pages. rgds, sreten.
  4. S

    Help With My Son's Philips 212 Stylus/Cartridge

    Hi, The stylus fitted is from a a DJ cartridge and very low compliance. The wrong type but it will have no problems with the 212's suspension. However if you fit a too high compliance stylus you may get handling problems, due to the arm mass/ compliance resonance and suspension resonance being...
  5. S

    Eminence Speaker

    Hi, They make PA and music drivers mainly. Some high efficiency hifi speakers use their PA drivers. Their LAB12 sub, intended for PA horn loaded subs, is a very popular hifi box subwoofer. rgds, sreten.
  6. S

    Replace stylus, or upgrade cartridge?

    Hi, No expert on aftermarket styli, but understand some of them are good and great value, some not so. The AT is the one to go for if you want a original manufacturers stylus. There is very little in it regarding price, $23 versus $26 and I can't say which will work better in your particular...
  7. S

    Looking for suggestions on a turntable for later 78's

    http://www.clickrepair.net/downloads/CRManual.pdf http://www.clickrepair.net/downloads/DNManual.pdf http://www.clickrepair.net/downloads/EQManual.pdf Hi, Are worth a read if you don't much about this subject. It recommends processing mono records as stereo files in Click Repair, but I can...
  8. S

    Technics SL-1700

    Hi, The AT112E/U appears to be a P-mount, rgds, sreten.
  9. S

    Looking for suggestions on a turntable for later 78's

    Hi, The Audio Technica AP-LP120(USB) should be fitted with an AT95E cartridge.* This is the 78 stylus for it : http://www.lpgear.com/product/ATN95W.html The specification recommends 2.5g tracking force, which you should generally use, but don't be afraid to use 3.0g or 3.5g if necessary. Just...
  10. S

    Replace stylus, or upgrade cartridge?

    Hi, +1 on the AT92ECD, just over $26 delivered from amazon. Its stylus, which you can fit to the AT3482P is $32 at LPGear. rgds, sreten.
  11. S

    Logitech z623 vs z533

    Hi, I've generally found Logitech's cheaper stuff to be rather good for the money, and certainly not bass heavy, set up properly. The secret to setting up that $70 system is keep the sub off the floor, set it up same hieght as the speakers and of course inbetween them. MInor tweaks can be a...
  12. S

    Logitech z623 vs z533

    Hi, I don't think it will be twice as good for twice the money, certainly louder. rgds, sreten. Useful tip. Mount the sub about the same hieght as the satellites.
  13. S

    speaker ID please

    Hi, You do realise that bass unit with most of the surround missing will have utterly no bass ? If they are both like that no bass at all. rgds, sreten.
  14. S

    Cartridge for Kenwood KD 5100 ~compliance issues ~

    Hi, The 2M Red guts are moreorless identical to the Super OM10, so a very usefull swap to do to see if the OM10 has problems. rgds, sreten.
  15. S

    Looking for a cartridge to play LPs and 78 by changing stylus

    Hi, LPGear do a 3.0 mil version of the N78S for the same price as a N78S. rgds, sreten.
  16. S

    Cartridge for Kenwood KD 5100 ~compliance issues ~

    Hi, Well something is wrong, and its unlikely to be the Super OM10 cartridge, rgds, sreten.
  17. S

    Cartridge for Kenwood KD 5100 ~compliance issues ~

    Hi, The Ortofon Super OM10 is a good match to that arm and it shouldn't sound lifeless. Its not the best cartridge in the world, a little opaque and crude at the top end perhaps, but it shouldn't sound really lifeless, its a very capable budget cartridge. I suspect some other problem. rgds...
  18. S

    Sonotone RM-1 Speakers

    http://www.roger-russell.com/sonopg/sonos.htm#rm1 /sreten.
  19. S

    I would like to upgrade an ADC XLM to a VLM stylus

    Hi, I had a VLM mkIII, it sounded great. The XLM is supposed to be better. However original ADC styli are very hard to find. http://www.lpgear.com/product/ADC211.html Is probably your best bet. rds, sreten.
  20. S

    How to correctly change crossover frequency on Realistic Mach Two's by changing caps/etc

    Hi, The layout has 3 parallel components across the input. Just amplifier frying totally wrong. Drawn by someone who has made the wrong assumptions of wiring. The first component of each leg of a parallel network must be in series. Not so for a series network. Trace the actual wiring of the...
  21. S

    Need cartridge suggestions for new Technics SL1200G

    Hi, For technical features at the price ($420) this is very hard to beat : http://www.lpgear.com/product/ATC01.html It has a boron cantilever, better then sapphire according to Ortofon. And a nude square mounted grain orientated microline tip. rgds, sreten.
  22. S

    How to correctly change crossover frequency on Realistic Mach Two's by changing caps/etc

    Hi, That schematic is definitely totally wrong, regarding the layout, it will blow up amplifiers. Best to trace it out yourself from the board. rgds, sreten.
  23. S

    Any modern stylus upgrade/mods for a vintage Goldring G800?

    Hi, Retipping a G800 stylus ? Madness IMO, rgds, sreten.
  24. S

    Pioneer pl-200 or Audio reflex mr-109???

    http://www.lpgear.com/product/SHN097xVL.html / sreten.
  25. S

    Need cartridge suggestions for new Technics SL1200G

    Hi, You clearly know utterly nothing about DJ vinyl mixing with two decks. Or understand the features required for mixing, like speed control. Or the size of that market and the utter dominance of the 1200 and 1200 clones in that market designed for that market. You also don't understand...
Back
Top Bottom