Dear gents,
The few post that dealt with woofers are very old (as the LV720's are getting older too)
My pair have a faulty woofer which could not be repaired. Does anyone here have a suggestion where to find one?
With thanks and regards
Harel
Dear members,
I have recently received a rare tube amp titled "ELGAR" with no other identification re: model, manufacturer or origin. I have received the amp without its tubes but was able to find that it should use the following:
4x12E1, 4Xecc82 1xE180CC and 2xGZ37 rectifier tubes. the Scope...
Gents i'm in a process of converting a pair of LWE Model 1 speakers, in order not to use LWE feedback. this will probably will require a change in the enclosure size and of-course a new crossover. AFAIC the woofer in this set-up is CTS 15" model 5805026. Where may i find the woofers parameters /...
Gents, anyone can share info on the "clip kit" please?
I have just received LWE Model 1 pair and wish to hock them to an amp feedback loop.
Thanks in advance for any info / assistance
Gents,
I just received a pair of LWE speakers which may be the "model 1" (pics are enclosed).
Looking for information i have noticed that these speakers have a very unique crossover which enable to connect them to the amps' feedback loop.
I have noticed several posts on AK and elsewhere, but...
Gents, I would like to thank you again for your kind advice and for escorting me through the process.
I took an old 8 pin plug and converted it to serve as the adapter base. took a new 9 pin spare tube socket and used it for the 6GT5's testing.
The Heathkit TC1 was set to test the 7591 tube and...
gadget73, thanks, i have tried a 7868<>El34 adapter and it does not work in checking 6GT5
I dont mind to built an adapter myself. just need a knolageble person to tell me which tube leg # in 6gt5 should be connected to the octal plug (i.e. EL34, 7591.. etc..)
Dear all
I have a TC1 Heathkit tube tester and it seems that it was not possible to test the 6GT5 (or 7868) tubes with it..
Can someone please instruct me how to build an adapter for it? one that i can plug in to the EL34 socket for instance and test these tubes?
Alternatively - is there a ready...
Hi
Old tube tested Heathkit TC1 does not have the appropriate socket to test the 6GT5 (9 pins)
Specs: http://www.r-type.org/pdfs/6gt5.pdf
What do you guys suggest? how do i make an adapter to test them?
thanks much
Harel
Hi
I have received a pair of 3 way Audax A360 (a kit, not the orig. A360)
Each have a elliptical woofer, a dome mid and a dome tweeter
the Domes are just fine the bass response is a bit weak and it feels that due to a fairly small box the speakers tend to slope down at ~60 Hrz. I would like to...
Hi
I just acquired Two Audio Concept Subs (Model Sun 1?) and one of the Woofer units is MIA..
These are large subs which enclose a passive cross inside and a double coil / double magnet 12 inch woofer - each. they also have a small notch filter for the shelve speakers that accompany the set...