Search results

  1. pat2330b

    Show Me Your Sansui!

    Just got my first Sansui gear model 8080. Very impressed by the built quality and how its easy to service. The sound is very impressive, very metallised bass mean that you hear the metal clips of the bass cord easyly. The unit have less power on the right channel, he need a good cleaning anyway...
  2. pat2330b

    Kenwood 700M Questions

    Hi gronald, just bought a 700m last week the part list of the power amp board is very usefull !!! If you have the other boards aswell it would be very appreciate !! Good job !
  3. pat2330b

    Kenwood Owners Show Us Your Kenwoods!

    Hi Kenwood AK community, just bougth this monster. I want to recap but cannot found the wiring diagram anywhere. THe faceplate is not perfect and speaker protection relay need to be change. Still working enough to see the potential.
  4. pat2330b

    Marantz 2325 nothing but snap crackle & pop !

    CHeck the pins in the connector on the preamp board.
  5. pat2330b

    2325 preamp board connector

    Ok interesting find but the pitch i need is 3,96mm. I didnt find more than 2,54mm on mouser for now. instead of that, the connector is perfect
  6. pat2330b

    2325 preamp board connector

    I bougth this 2325 in pretty bad shape last november. I have rebuilt the power supply main caps with P800, the two P700 boards, P300 and P400. PE01 is a major issu for the rebulit cause i had to find the volume pot and only found it from auction site at 90$. The resistance of the pot is good...
  7. pat2330b

    2325 preamp board connector

    HI audiokarma community! have a broken female 14 pins connector on the pre amp board of a 2325. If anybody know where i can get this type(similar) of connector? i would like to change the male and the female rack if possible.
  8. pat2330b

    Marantz 2385 Survivor

    HI, can you tell witch black pain you use for the refresh please? nice job
  9. pat2330b

    Thoughts on 2270/2275/2285/2285b/2325

    in my opinion, marantz 19 is the most beautifull..
  10. pat2330b

    2325 rebuilt project

    ok i got a strange problem here. Any help would be very appreciate. -left and right p700 boards connected = speaker relay no clic Left only =clic right only =no clic -i have inverse the boards left to right and left to right=(same) clic on the left side only by elimination i know that the...
  11. pat2330b

    2325 rebuilt project

    Ok thx rBuckner!, i have found MJ21195G and MJ21196G only (G versions) at mouser, is that ok ?
  12. pat2330b

    Starting my first 2325 Restoration and Looking for Guidance

    Nice job! Good looking amp:biggrin:
  13. pat2330b

    Thoughts on 2270/2275/2285/2285b/2325

    in my case, the 2240 and 2330b are freschly total recap and diffirence before and after is confirmed for both. As i said erlyer the 2240 deliver great quality and impressive sound definition after recap and its sounds better yes but if you can crank it up the 2330b is a better musical...
  14. pat2330b

    2325 rebuilt project

    i have found out that the replacement number are MJ21193G and MJ21194G but one of them is BO( ref:MARANTZ TRANSISTOR/DIODE/TRIMMER SUBSTITUTION GUIDE). I'm still searching for better possible substitution.
  15. pat2330b

    2325 rebuilt project

    ok all foor are good but still a short ont the left side occur dont know wath to do at this point.. I just rebuilt the p700 boards with peace love from ebay yes, kit is interesting but not complete. I had to buy the rest of caps missing from digikey. And shipping cost are astronomic..
  16. pat2330b

    2325 rebuilt project

    Ok i have rebuilt the power supply board and both power amp board. When i bought the amp i have put power no speaker just to check the speaker relay behavior. The relay clic for couple of second and came off after. After the rebuilt, it didnt clic at all. I try power it up with one power board...
  17. pat2330b

    Thoughts on 2270/2275/2285/2285b/2325

    Personnaly i can only compare 2240, 2325 and 2330b cause i didnt experience the others. 2240 has the best warm sound of all. Sound definition is much better than the 2330b an better than 2325. 2330b is more optimise in the mid range that is not my prefere sound range but some people really like...
  18. pat2330b

    Marantz 2325 PH01 Buffer Amp Diagnosis

    Just burn RH28 after rebuilt of the PH board too, flip CH13 and its ok, usefull thread!
  19. pat2330b

    2325 rebuilt project

    I began the project with the reconstruction of the front. I had to find M3 and M4 screws, i order the volume pot cause it was missing too. I have reconstruct the light housing, light diffusing section and the face plate. Still all the pots screws are missing from now, one knob button etc. this...
  20. pat2330b

    2325 rebuilt project

    HI RIch, sure! your a great inspiration with a couple of weeks in front :)
  21. pat2330b

    2325 rebuilt project

    Hi all, just bought a 2325 in sad condition for 1K$. Principals componant are in good shape but the from is completely dissemble. I had to buy rush cause bidding procees was beginning.. at firt sight need a faceplate and volume pot.. i begin ordering kits for complete rebuilt. maybe abd suprises...
  22. pat2330b

    Starting my first 2325 Restoration and Looking for Guidance

    ok rich thx for presious infos! i bought the kits from peace love, music too but did nt go for the BA 312 for now.
  23. pat2330b

    Starting my first 2325 Restoration and Looking for Guidance

    Hi Richiem do you have create a part list that i can use ? im starting a 2325 rebuilt too. It would be very helpfull if you have it. Thx!
  24. pat2330b

    What are you Listening To Right Now? - and more

    I just discover blue oster cult first album (1972). This album sound so nice on marantz. I like to play same album release at approx the same time of my receivers :)
Back
Top Bottom