Search results

or semi-conductor? http://korgnutube.com/en/ http://www.nutube.us/ - some DIY. https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2054436.m570.l1313.TR3.TRC2.A0.H0.Xnutube.TRS0&_nkw=nutube&_sacat=0 :)

Most definitely, not. Same product line as UMC 202HD: https://audiosciencereview.com/forum/index.php?threads/budget-dac-review-behringer-umc204hd.1658/ https://audiosciencereview.com/forum/index.php?threads/behringer-umc-204hd-headphone-review.2013/

I have the UMC202 and am happy with it connected to my laptop for general use. I will probably purchase the Topping D30 for my stereo system. I am only too aware of the vagaries of our hearing which was evolved to give warnings of short term danger rather than the specifics of concentration...

Apologies, I double-posted the UCA222 link. Edit of post shows UMC202 test link.

Measurements:https://audiosciencereview.com/forum/index.php?threads/topping-d30-dac-measurement-and-review.2016/ FYI: https://audiosciencereview.com/forum/index.php?forums/digital-audio-converters-dacs.10/ Basic...

GeeDeeEmm, No Bieber. :dunno: I'm not Walter but Holepunch, also. :rolleyes: You must be thinking of someone else.

My experience, see post #60 : http://audiokarma.org/forums/index.php?threads/luxman-r1050-popping-sound-and-protection-mode.733690/page-3

Late to this thread. I had a problem with intermittent total loss of output with my R-1050 . It was caused by D102b(VD1221), twin diode, internally opening between the two diode sections. The original part is probably unobtainable but two individual diodes in series does the job. I have since...

Rock,Jazz, Blues, and some Classical, mainly. A wide variety of artists on CD or LP(or both). Some that take up a lot of shelf space: Louis Armstrong, Ella Fitzgerald, Miles Davis, Hiromi Euhara, Charles Mingus, Jeff Beck Joni Mitchell, Marianne Faithful, Emmylou Harris, Melody Gardot...

Loudspeaker ITT Cannon: https://academickids.com/encyclopedia/index.php/XLR_connector The OP has been answered. The appropriate cable for the speaker has been identified.

I would go with the British Broadcasting Corporation's view. They designed the speakers.

My Luxman R 1050(purchased new) is the amp I am most fond of. At present when turned on, after the time-delay relay operates I get a sound similar to waves breaking on a beach which fades away after 30 secs or so. Transistor or old PS caps, anyone? If you have intermittent cut-out I can help...

Sweet and mellow when appropriate; loud, clean and punchy when it should be. Not for doof-doofers. I admit that I am biased toward sensitive and dynamic drivers in big cabs with plenty of driving power behind them. :rolleyes:

Great build thread. Lots of practical info for DIYers. I really like the 'retro' approach. FYE. http://www.itishifi.com/search/label/Altec Where did you get the decals from?

Not gone, just preoccupied with house repairs. Nothing to add to my OP at the moment. I am at the happy listener stage, :music: GeeDeeEmm ,I am looking forward to reading about your project, linked above.

Have you asked here? http://www.audiokarma.org/forums/index.php?forums/exclusively-sansui.39/

I was hoping that there were spade connectors on the PCB. I came up empty on Google looking for those. All I can suggest is that you email Sansui Japan with those pics and see what they can offer. Check the schematic(http://www.vintageshifi.com/repertoire-pdf/Sansui.php) for a part number. This...

Can you pull one to expose the terminal and post a photo of it?

It took me about 3 years from research to completion. Life does get in the way. The end result is that I am 'looking no more'. Very happy.

I don't know what those statements beneath threads are called. Mine is usually "Opinions are only as strong as their supportable evidence". I think we are like-minded.

Nice to meet a kindred spirit.

One of the best vintage speakers. Even today it is hard to beat on bang for the buck if you like the Altec-style sound. They are more scarce than hens teeth here in Australia. If I could have found a pair I would have been spared a lot of toil in building from scratch.

Gee, fellas, I'll take that as an excuse to finish the story Before I continue, I want to give some background information that is relevant to how I approach things. Half-way through my Electrical Engineering degree course I ran out of money and had to get a job. I struck it lucky and joined...

416 LF and 802/511b HF in and wired. Ports next. DIY port hole-cutter jig and cheap plumbing fittings. The port tubes are a snug fit in the flanges and can be swapped for various lengths for tuning. I still haven't permanently glued the tubes to the flanges as they work well as is, and the...

THE HORNS Refurbishing. Housing/sled fit. JBL 2404 Mock-up.Undecided about adding it, as yet. HF Assembled/painted. Constrained-layer damping material top, underside and in the hollows of the bells.