Search results

1000a hi, if this helps.

Hi, I have a 1000A my question is on the back of the unit there is a tag with specs. First line says 240 volt. I've seen other similar units with 117 volt. Assuming 117 was made for us and japan and 240 was intended for Europe. If anyone could confirm and possibly expand on the European...

Thanks for the input Mark, I did do research on cap issues as such and realize the potential problems. I did use a variac, metered, to bring this unit on line watching for voltage drops. I didn't notice anything unusual throughout the process such as the obvious, smoke. Next step will be...

OK, just brought a 1000A back on line, slowly, all lit up but no output to speaks or head phones. Any help would be appreciated, hopefully something simple. Rob

Hi all, what type of 10A 250v fuse (4) is used on the f-2656 board? slo-blo or quick?

9090 DB & 7000 pushing SP 5500's

9090 DB driving SP 5500's, and a 7000 Receiver

With the sp 5500's I would hope that wasn't the case. The sound seemed to come from the unit as I was standing near it whereas the speakers are placed a fair distance from the 9090db.

"loud", It still works haven't had the problem again, so far. I guess I'll monitor it and maybe try some different volume levels.

Hi all, new to the forum. I've monitoring AK and I am impressed by the knowledge exchanged along with good ideas. Seems like a great place to start for a novice such as myself. On with my 9090 DB. I just bought this beautiful unit last week. Got it up and running with SP 5500's, an SD...