Search results

  1. bryans12v

    Happy Birthday bryan's12v!

    Thank you all for the Birthday wishes. Wasnt expecting this!
  2. bryans12v

    Marantz Model 9 Prototype

    Yes, unfortunately I did have to part with this Model 9. Our family was growing at the time and I was able to let go of quite a few pieces to get us into something bigger. Actually glad we did this back then as the value of our place has skyrocketed in the past 3 years! Here's the new place...
  3. bryans12v

    Marantz Model 9 Prototype

    You have a Model 9 with a V2 position? Care to share some images with us?
  4. bryans12v

    Marantz 510

    I wouldnt be focused on just replacing devices. First you need to determine what's faulty. Have the above mentioned been pulled and tested? There are some the ones you mentioned are TO-66 package parts that are no longer available unless you find NOS and they will either be very expensive or...
  5. bryans12v

    Marantz 510

    Have you determined what transistors need replacing or whats actually causing the channel drop?
  6. bryans12v

    Rehabbed AU-717 going into protection

    Recently fixed up a nice but non functioning 717for a friend. It had been previously worked on and someone had fitted main filters that were too small for the clamps, used cardboard to take up the space (they were still unsecured) as well as some other questionable work. I replaced all the...
  7. bryans12v

    Marantz 4400 Scope Harness

    Cant tell you the colors offhand but: Pin 1 comes off of J917 Pin 2 comes from J911 Pin 3 from J916 Pin 4 from J919 Pin 5 from J908 Pin 7 from J922 Pin 9 from J921 Pin 11 from J906 Pin 12 from J905 Pin 14 from J910
  8. bryans12v

    Calling on Tube amp owners in the NY Tri state area Amp Shootout

    Its become my favorite amp. Its the new version TU-8600S with the sweet luhndal transformers. Still saving for new WE tubes. Currently Genalex in it.
  9. bryans12v

    Calling on Tube amp owners in the NY Tri state area Amp Shootout

    I'm in Orange County NY and could bring a sweet sounding Marantz 8 and a nice Elekit SET 300B amp!
  10. bryans12v

    The Bogantz Quad Preamp

    Here are the nudes as promised. Im quite surprised with the build quality here.
  11. bryans12v

    What's Up at Mouser?

    My delayed order, they upgraded the shipping to overnight too!.
  12. bryans12v

    The Bogantz Quad Preamp

    Figured you guys would get a kick out of this. A buddy I met through lathetrolls showed me this really cool quad preamp he was given from another friend of his who was big into the record cutting industry, Greg Bogantz. Guess the guy was cutting CD4 disc's back in thier heyday and built some...
  13. bryans12v

    What's Up at Mouser?

    This is the first time I've ever had any issue with mouser and have over 100 orders in my history. I order a lot from my phone and didn't see any notice about a delay through the checkout process. Stuff always arrived two days later to me in NY. Wish I would've seen a notice, I would've gone...
  14. bryans12v

    Kitty Hawk Junior 220v

    Any guitar amp experts out there know if the power transformer in these can be wired to 120V? Looking at the schematic doesn't show it possible. Someone converted the plug to a U.S. mains plug and I'm hesitant to plug it in. Clearly states 220v/230v input. If not, if imagine I would need one...
  15. bryans12v

    Rek-o-kut trade for Fairchild?

    I've got one of those Marantz/clear audio tables at the moment and enjoy it. To me, its not really so much about the value. Its more about thr practicality and usage. I dont ever really see myself using the rekokut but could potentially see myself using thr Fairchild if it were to make a...
  16. bryans12v

    MARANTZ 2240B

    Have you taken the output transistors out and attempted powering up with the dbt? Did it go dim? Remember, at this point, you shouldn't be powering this up for longer than a couple seconds. You need to narrow down your short or shorted component. Until then, applying prolonged power will only...
  17. bryans12v

    Rek-o-kut trade for Fairchild?

    My apologies! You're correct after looking at both serial #s!
  18. bryans12v

    Rek-o-kut trade for Fairchild?

    I did see that. I think they're two different machines although same model. I compared the nicks and dings in the images of the two side by side. They don't match up. The one from years back actually had a cutting head it too.
  19. bryans12v

    Rek-o-kut trade for Fairchild?

    So I inherited a really cool Rek-o-kut imperial in great shape. While I know they're somewhat desirable to folks who actually cut, I don't. I really have no intentions of cutting records. A somewhat local guy is looking to part with an ok looking Fairchild 530G table. It has no tonearm. I was...
  20. bryans12v

    NEW- to me PL-570 questions and advice needed

    Yes, it Slides up and out. Kinda tough to get out.
  21. bryans12v

    NEW- to me PL-570 questions and advice needed

    This clip. It tethers the end of the cable. It can be a little PITA to get out. Once out, the cable jacket can slide out of the channel its in.
  22. bryans12v

    Quad II C4/C6 capacitor questions

    IMO, any 16-22uf capacitor of the proper working voltage should suffice. Just tie the negative leads together and attach accordingly.. In my experience, when mounting a multicap in there, you must utilize a screw hole for the nameplate and the plates never sit flush because of the screw head...
  23. bryans12v

    Guess what it's going to be contest . . .

    833 SET amp would be my guess and thats because its one i really want to build as well. :)
  24. bryans12v

    Help diagnosing noise in a Marantz 7 circuit

    All of my vintage gear will occasionally make this exact noise if my cell phone is nearby and exchanging data.. I'm no tube amp expert so take my advice with a grain or two of salt. V6 in the 7 is a cathode follower and provides isolation for for both high and low frequency filters. This is...
  25. bryans12v

    NEW- to me PL-570 questions and advice needed

    On these tables, its a bit if work to inspect the reduction gears for cracks. It could be working fine now but if a gear has a gmcrack in it, its only a matter if time before it breaks into pieces at which point is much more difficult to repair. To access the tonearm gear / motor: Prop the...
Back
Top Bottom