Hello ak community.
the highs my model 19 is starting to sound a little to harsh and out of place.
I do suspect maybe its the crossover as its never been serviced nor recapped. (100% original)
is the GPA 19 crossover a big improvement vs a freshly recapped 19 stock 19 crossovers?
I'm...
Hi all, I acquired a pair of SS-1020 Stanley Screamer enclosures. For those unfamiliar, they are 4’x4’x2’ 210lbs 2x15 Altec ported subwoofers. They are massive and beautiful and a questionable purchase. The previous owner cut them to fit 18’s which I want to undo. I have a few questions for the...
My Dad purchased these in 1965. They're University Sound Phoenix Speakers (15" 3 way triaxial?) He always told me they were kind of a knock off of the Altec Lansing Voice of the Theater. Needless to say I can't find any info on these. They work and still sound very nice for a speaker that's...
Have a chance to pickup a pair of the JBL-4311-b’s with one of them having a tear in the woofer and the tweeter, the other one seems ok all on drivers, both mids seem ok too. They have the grey cabinets and come with grills. Have been sitting in the garage for many years and are in aged but not...
Hi, I just had someone drop off the Altecs in the picture, but I'm having a heck of a time trying to find more info on them. You'll notice that someone has replaced the woofers with MTXs (those wouldn't have been stock, would they??). I did do a quick frequency response test and the tweeters...
Howdy, I need advice on repairing a set of Altec Lansing 9842a monitor cabinets. Someone had removed the original 12" drivers and enlarged the opening for 15" Radio Shack woofers.
I have a set of the original Altec woofers just renconed at GPA.
How can I repair the opening to original...
Howdy- came into some 605b Altec Duplex speakers and plan to build some cabinets for them. Looking for any input on design, style, dimensions, cubic feet- just about anything to ruminate on before I get serious. Appreciate any and all. Thanks Jackson
I just picked up a pair of these with one tweeter not working for the price of free99. Upon further inspection, the tweeter shows resistance and puts out sound when the crossover is bypassed.
They have a high frequency adjustment pot that probably needs a good cleaning or to be bypassed. The...
Howdy- looking for a resource for a Recone kit Altec Model 14 woofers #34633- I know contact Great Plains- been trying to- no response.
Not sure if they provide that service anyway- not listed on the website.
Thanks for any leads or info- Jackson
Hi guys, I have a pair of Altec Lansing Model 14 speakers that I need some help troubleshooting. The issue I'm having is one speaker sounds thinner than the other, like its missing something - middle or low end maybe, or maybe the top end is too pronounced, hard to say. It almost seems like...
Hello
I have a Marantz 2245 and have paired it with Kenwood Kl888D’s. I listen to mostly rock music in a 12x14 living room with hardwood floors, and furniture. I don’t feel like I have a great sounding system and am thinking I need to change my speakers up.
Not sure what would go with my...
I am a new owner of a McIntosh MC2105 amplifier & C26 preamplifier. Apparently they have been sitting for a few years, so I will be taking them to a tech for service, to make sure they are safe to plug in.
While the speakers I currently use ( 1 & 201 ') sound very nice with my Marantz 2270, I...
Hi gang, I’m getting ready to redo the surrounds on a pair of Altec Lansing 8913b “studio monitor” speakers. Both woofs and mids need sourrounds, mostly ‘cause they look scruffy. Cabinets are pretty nice and they use the “Mantaray” tweeters. This particular pair was actually used as a studio...
Does anyone have any recommendations for after market tweeters for the Altec Model 3's???
The stock high frequency frame drivers are working fine but the upper frequencies seem a little reserved. The high frequency control knob is set to the middle as standard, I find when I turn that up to...
Hi everyone,
I don't see much reference online about Altec Studio Monitors - 9842-8A/F and all I know in GPA website, it is a professional version of Model 14 and it has a different or utilitarian cabinet. Although, I still prefer the cabinet of Model 14.
May I know what is the difference...
I got an Altec Model 14 speakers and currently using solid state equipment at this moment. I'd like to use an integrated tube amp that will best match model 14 and provide a more holographic stereo imaging and sweet soundstage.
Let me know your recommendation and what was you're experience...
I’m seeking information about these drivers pulled from a trashed set of Altec Santana cabinets I picked up free on FB Marketplace. The appear to have been reconed in 1998. I connected them to a receiver, and they sound great, so whoever did the recone job did it right. The dust caps might...
I re-capped some Altec Lansing Bolero 890C speakers several months ago and I just mapped out what this crossover is doing and there is one strange thing:
The tweeter has a 6uf cap which is normal then after that (in parallel) is a 3uf cap and a 15 ohm resistor. The resistor makes sense since...
Hello I’m a member from the UK. We don’t see many original Altecs here so when I saw a pair of the well received Model Three’s at auction I decided to take the gamble. I managed to get them for £150. They are the Series Two models. Overall I’m really impressed, they possess a big, deep...
Hello I’m a member from the UK. We don’t see many original Altecs here so when I saw a pair of the well received Model Three’s at auction I decided to take the gamble. I managed to get them for £150. They are the Series Two models. Overall I’m really impressed, they possess a big, deep...
Hello just joined the community and want to thank everyone for all the shared info I've gleaned already...
Hope I'm posting in the right location for this- and I apologize if I have so many questions as I'm a bit of a newbie
I recently acquired a pair of Heathkit AS-101 cabinets that were...
Avs300 multimedia,
Any information about this or brand history?
$5 at habitat few weeks ago . Struggling to find a power cable for it , using a household one that was lying around .
Altec Lansing Defunct ?
Was some static when nothing was playing , but that’s normal of non hd audio. Or...
Hello all! I got these for a great deal and they reminded me of speakers my brother used to run back in the day. I can’t seem to find any background data anywhere!♂️
I just pulled out a pair of Bose 401’s... yes I know and admit I have kept a set of Bose speakers since the 70’s. Anyway, I haven’t used these since 2013 or 2014. I hooked these to a Marantz MR 1170..... yes I know (dark years) but these two systems put a BIG smile on my face once I cranked them...
I'm just getting back into vintage audio after an absence of about 30 years. Can anyone tell me about Altec Lansing Model 205. I found some for 40 bucks. Looks like they need to be re-foamed, but otherwise pretty good. Are they worth the trouble?