ca-1000

I need confirmation that my Yamaha CA-1000 pilot lamp is for sure a 12v 60ma bulb. Would any 12v bulb work? Or a 12v LED instead? Thanks in advance!!

This is the rear RCA Panel for a CA-1000, I would like to upgrade the RCA connectors to Gold. I am seeking ideas for custom PCB design to accommodate this.

Anyone know where these can be purchased? Needing, all are 1/2w 3.9 Ohm 47 Ohm 68 Ohm 680 Ohm 220 Ohm

Hi, I have a CA-610 and a CA-1000. I’m using an Audio Technica AT95E cart on my Technics SL-1700. Records sound great on the 610, but peakier at high frequencies on the 1000. The AT95E cart is good for a load capacitance of 200pf. So 100pf for the cable, and 100pf for the phono input. By the...

Hi all, I am refurbishing a CA-1000. I have replaced the main filter caps, relay, snap switches and have desoldered and polished the contacts of the coupling and phono selector switches. I have also replaced the amp board trimmer resistors with Bourns multiturn, and cleaned and reapplied heat...

I’m rebuilding a CA-1000 integrated amp I just purchased, and am having trouble tracking down replacements for the main power supply caps. The originals are 18,000uF 63V and are 50mm diameter and 80mm long, and there’s not room to fit larger ones in the amp. They also have solder tabs soldered...

I have been working on my CA-1000 more. When trying to adjust the function board, I see mine is different than in the service manual. I have LC65101 rather than LC62854. The traces are actually different. I'm wondering if anyone has adjusted this one or knows of a different manual. I was able...