diy antenna

  1. S

    DIY FM antenna to tuner connection question

    I built a folded dipole out of copper pipe awhile back using an online calculator and design. from the antenna I have a radioshack 75ohm to 300ohm balun, going into a roughly 30' run of RG6. At the receiver end my receiver Fisher 400 only has the old 300ohm screw terminals with local or distant...
  2. musichal

    Building A Simple Dipole FM Antenna

    I have 25' of 3/8" copper tubing and bad reception. Have had the tubing for several years, it's doing nothing, and I have no other plans for it, and after reading about the outdoor use of vertically mounted dipoles as pretty decent omnis, it occurred to me that I have three hall closets in a...
Back
Top Bottom