level

My RT-909 has a problem where the output on the L channel during FWD Play drops by two meter segments on an intermittent basis. The problem is cleared by pausing and un-pausing playback. Reversing play direction (FWD to REV then REV to FWD) also clears the problem. I have confirmed this by...

Hi everyone! Hope that someone can help me on this one. I have just bought a second hand TEAC A-3340 and have played a bit with it. After having cleaned everything thoroughly, all connectors, all heads and calibrated the LINE/MIC inputs and VU Meters, I have noticed an issue. If all tracks...

I'm intrigued with the idea of using in-line attenuators on the input terminals of my Fisher integrated tube amp (model X-202) it seems that modern input sources are too "hot" (too high voltage) for older equipment like a tube amp, for example a CD player, DAC box, etc... and that can overload...

My Pioneer CT-F950 has developed a problem when recording onto chrome (CrO2) tapes and with the tape selection switch set to chrome. The recorded level on the left channel is significantly less (about half) than the recorded level on the right channel. The problem does not occur with metal...

Almost done with my AR XA rebuild and some final steps to do is level everything out. I like the idea of dropping the bubble level over the spindle for accuracy. But is 280 grams of weight to much for this TT? Don't want to "bog" down the motor anymore than I have to. Can you guys suggest...

I recently bought a Hitachi KST-3400H AM/FM Radio and Tape Deck with the original two speakers. The Radio works well; clarity is fair as far as I can tell. When I play a cassette however, the right speaker makes a loud buzzing/humming sound and the level meter is pegged (maxed) for the right...