onkyo

  1. D

    Use subwoofer lfe or crossover?

    I recently got an svs pb1000 and am working with an onkyo tx-ds575x which has a sub pre out. I listen to music, mainly vinyl and the system is rarely used for tv/movies. I have two klipsch ksf 8.5 towers and I have set the receiver to recognize them as small. I am wondering wether it’s better...
  2. B

    Help with Onkyo PL-25F

    HELLO ALL! i just joined, been reading for a week or so to help me get something good, or at least a good deal. i ended up with an Onkyo PL-25F for $25 that works? when plugged in & powered on table spins, but the arm is at the innermost point, when button 11 (13?) is pushed to make it go...
  3. G

    Replacement for a Shure M97HE Stylus (on a Onkyo CP 700M)

    Hi guys, I'm very much a newbie on turntables, but got an Onkyo CP-700M handed down to me by my grandparents. However, the needle is broken and I'd like to get it back up and running. I believe the stylus is a Shure M97HE, but the options online are way too expensive for me. I'm looking for...
  4. M

    Yahama TC1000 Help

    Hey guys, I recently acquired a Yamaha TC1000 is good cosmetic condition. I was too fired up to do any cleaning and hooked it up to a Onkyo TX 2500. I have attached a video of this awful sound from the left channel that remains when switching the input on the Yamaha. Any advice is welcome...
  5. VintageDutch

    Introduction of myself :-)

    Hello to you all, It is a good habit to introduce yourself when becoming a new member on a forum. Same here. Okay Here we go. My name is Auke Dost I'm an guy from Holland so i'm Dutch :) You all have heard about Holland (or The Netherlands) No it not the same as Amsterdam, we don not all...
  6. D

    Onkyo TX-NR535 temp sensor repeatedly tripping out

    Hi - I've had my TXNR535 receiver for about 5-6 yrs and it has always worked well, until about 6 mo ago. It started clicking on and then instantly clicking off. I followed an Onkyo troubleshooting page that explained how to reset the temperature sensor. This worked for a couple weeks until I...
  7. A

    Lookjng for power supply onky receiver

    Hi there I am looking for a new power supply for my onkyo receiver. Or a replacement. Model HT-R693 that is a number for the complete set with speakers. I was already looking and the receiver model is HT-S7705 After a few minutes 10 to 20 minutes sometimes longer the power supply is making...
  8. fjords

    Beginner Looking for Help!

    Hi guys, I guess you can say I'm pretty inexperienced with turntables and everything having to do with them. I've recently found myself a used Onkyo CP1046F that I snagged for $10 and I absolutely love how it looks. The only problem is I bought it without a stylus/cartridge (I don't know the...
  9. Brunsvold

    Guidance on tapedeck repair

    Hi AK Community, I purchased an Onkyo Integra TA-2044 (silver) a few months back. It was running fine and then...not. I turn it on, it automatically starts spinning one of the belts, but the tape doesn't spin and the door won't eject. None of the function buttons are responsive (the selector...
  10. cmarti

    Onkyo CP-1046f overhang gauge

    Hey guys, I just got a CP-1046F turntable and noticed the owner's manual makes mention of an overhang gauge. Of course, I can't find it online, what does everyone use to align a cartridge on these straight-arm Onkyo turntable? Thanks in advance :)
  11. I

    Any info/experience with vintage Onkyo S-25 speakers?

    Hi folks My first post/question here so pls be kind to a newbie-know-nothing from Downunder ... Does anyone here have any info on or experience with vintage Onkyo S-25 speakers, please? I have found a few other posts in AK related to vintage Onkyo model 25 speakers, but they seem to be a...
  12. Mark T.

    Looking for recommendations for a pair of speakers

    I recently got my ebay find Onkyo DX-702 CD player up and running, it's hooked up to my old Onkyo HT-R520 receiver. I'm using a couple of my old surround sound speakers for the time being, but I'm looking for some recommendations for a pair of speakers. All I want is 2 towers or something like...
  13. N

    AKAI AS-1080 NO POWER

    Hello guys,anyone can help me please. i have an AKAI AS-1080 with no power.i checked the fuse and it is ok, power switch ok, rectifier ok, the two big capacitors has 44vdc on multimeter.what is the next step? thanks in advance.sorry for poor english, im from spain
  14. JPJ

    Onkyo A65 integrated

    came across one of these and wondering if anyone knows if it's fine driving 4 ohm speakers (Kef 107s)? found a manual online and it just says 100wpc @ 8 ohms
  15. Frbock

    Debating 3 options two of which I already own

    I have an Onkyo tx-8555 receiver that was muddy when I tried to replace my Yamaha a-32 (140wpc/ 8 more at 4). So, I went for plan B. I have an Adcom GTP-400 driving an Onkyo M-5010(75/8 but only 65/4). It sounds very clear. I sent the Tx-8555 out for a re-bias, should punch it up to good as new...
  16. M

    buying a vintage turntable, plesase help:)

    Hello, I am an absolute newbie trying to buy some budget friendly yet decent turntable, so I went for a vintage one. I have these three options: - Onkyo CP-1026A Direct Drive, Reject / Autoreturn - Dual CS-607 Direct Drive, Autoreturn - Telefunken S-800 Direct Drive, Manual Onkyo has a 'new...
  17. P

    Fixing Onkyo CP-1400

    Hi all, I’m new to turntables and recently got my dad’s old set up which has been neglected. He said it was a wedding gift and he’s never used the turntable. So far I have cleaned the dust off and saw that it needs a new belt. When I turned it on the motor was working. I was also thinking about...
  18. lattiboy

    After a decade of searching, I’ve finally gotten an excellent home theater AND music room!

    First off, the system: Audio: Marantz SR6012 Maverick Audio D1 + tube DAC (WE getter installed) Chromecast Audio Onkyo M-504 power amplifier (powering NHTs via pre outs) NHT Classic Four speakers Boston Acoustics VR12 center channel 2x Infinity SUB R12 subwoofers Panamax Power conditioner...
  19. lattiboy

    Pre out levels seems lower than published specs on my Marantz receiver

    Hi all, I have a split HT/2ch system. For music it’s an external DAC into the analog CD input of a Marantz SR6012 which has analog pre outs feeding an Onkyo M-504 power amp. As a test, I hooked up a Onkyo P304 preamp being fed the same DAC to the M-504. Conservatively it’s 2-3 times louder at...
  20. N

    SONY DVP-9000ES DEAD

    hello guys, i have a sony dvp-9000es player and it has no power.mains ok, fuse is ok, power switch on front is ok.relay no click. what to do next? thanks
  21. ASEMechanic

    My equipment and current setups.

    Hey there... Thought I would jump right in and go through my equipment, partially to see what opinions the experienced folks have, and partially just to make an actual inventory. So, here we go. Home Theater: Receiver: Onkyo TX-NR646 Turntable: Technics 1200MK2 w/Shure M97xE cartridge Front...
  22. M

    Onkyo CP-1260f Auto play / Stylus height issue

    Bought this turntable yesterday. It powered up and quartz lock is giving me 33 1/3 nicely. Auto play wasn't working (play light flashing) and the tonearm was wee a bit stiff. Pulled off the bottom cover and cleaned things up . The tonearm gear lube had turned to honey, so, I scrubbed it out with...
  23. K

    Onkyo CP-1044F - is it any good?

    Hello everyone, This is my first post and I am a newbie. I just bought the Onkyo CP-1044F for $50, it is in great shape, but I can’t find any info on it. Is it any good? It also came with an AT cartridge and I don’t know how to identify it. Should I upgrade the cartridge? Thanks!
  24. Hector81

    Hooking up Equalizer to Onkyo 9110

    Hi! I am a newbie here facing the endless issue of hooking up an equalizer to an amp. I have read many posts but I still cannot figure out how to do it in my particular system. I have an amp Onkyo 9110 and I just got an EQ JVC Sea-60. The amp has: 4 RCA Inputs, 1 RCA Line Out, 1 Pre-out for...
  25. A

    Onkyo RI Cable

    Hello everyone, Hope your day is going well. I recently bought an Onkyo T-403 tuner to match up with my Onkyo A-RV401. Everything operates as expected and sounds good. Remote works on the amp functions very well. I've owned the amp since new as I bought the amp new at a local audio dealer...
Back
Top Bottom