Hello, everyone
I've been trying to diagnose a low-level audio hum in a Pioneer SX-1280 but, so far, have come up with nothing. I've read other threads in the Pioneer forum that have dealt with the same hum issue, but my situation appears to be a bit different from the others.
The receiver...
Time for me to share another build. Keep in mind that this 1280 was picked up with some issues.
Fired it up on the dim bulb = passed. Seemed to work somewhat... bias was off in one channel and offset was off. I dialed DC offset to a more acceptable level and tweaked bias as close as...
I had a quick look inside of my lovely Pioneer SX-1280 to see that the pots are enclosed in a housing so it doesn't appear like it's going to be a simple shot of Deoxit into them.
Any help and suggestions would be appreciated, for I've got one that's acting up.
Appreciated
Ken
Hello all! recently acquired this marvelous SX-1280 - been looking for one for a while. I also have an SX-980 which i recapped myself back in 2011. Here are some pictures that I managed to take while restoring this big old dog. re soldered all of the solder joints, full recap and replacement of...
Hello-
I'm in need of the near impossible to find IC chips for my Pioneer SX-1280. Any AKers out there have any and are willing to sell?
Parts are PA1001A and PA1002
Thanks all