refinish

  1. M

    KLF-20 Cabinets with a gouge

    Recently acquired my first set of Klipsch, a pair of KLF-20's. Has a half dollar size gouge in the side that I feel compelled to remedy as overall the cabinets needed some love. What is the forum's feeling on this? Should I patch, sand and veneer or just vinyl wrap? I'm decent at woodworking...
  2. Wembely

    ADS L880/2 refinishing, not seen this before & need some advice

    Hello all. Long time listener, first time caller… I am refinishing some L880/2 walnut that I picked up for $200 locally - mostly based on what I have read here. Sonically outstanding condition, but one of the speakers has staining/bleaching/ god knows what on the top. By the feel, the layer...
  3. plresults

    Refinish Piano Black on Sansui Turntables? SR-838 or 929?

    Hi: I have a new-to-me 838 with some minor finish loss. All the color is there, but the gloss is gone where the cover meets the plinth, with the minor-est of black loss. Loss is not all the way to substrate, but getting there in spots. Does any one know of a successful technique to fill or paint...
  4. C

    Restoration of Acoustic Research AR3 Speakers

    So I fairly recently obtained a pair of AR3 speakers that were in pretty bad shape and, with the generous support of members on this forum and a few other sources (more on that later) I managed to restore them to what I feel is a good representation of their former glory. I wanted to share my...
  5. S

    Allison Model 1 Restoration - Matching veneer/finish question

    A friend's father was downsizing and I have been given a pair of Allison Acoustics Model 1 speakers. They were in somewhat rough shape: woofers foam was rotten, scrathes on tops, bases had seen some moisture damage. I am working on a moderate level of restoration to bring them back to life...
  6. CheddarHeadG

    Advents - Refinish Utility Cabs?

    I just picked up a set of what I believe are "Advent-1 Early Version" based on the "identify" thread. With these being utility cabinets, are there are refinishing options? Better to keep them as original as possible for future resale? I am now second owner - mechanically good, refoamed...
  7. Natertots

    Kappa 6.1 cabinet refinish/repair

    I am looking for advice on how best to refinish/repair what appears to be some water damage to some Kappa 6.1 series II’s I picked up a while back. I have done some searching and the advice I have found is to hand sand with 300 grit and use Howard's Restorafinish Golden Oak to refinish. This...
  8. Fosgatesubs

    RTR 280DR

    Hello fellow audiophiles. I am new to the forum and need some help. I just picked up a pair of RTR 280DR's from my local Goodwill for $26. The cabinets definitely need some TLC, but the drivers are all in great shape. I tested them out on a older Marantz that I have and they just soaked up the...
  9. S

    Refinishing accent wood on Jensen era Advents

    Any tips or tricks for refinishing Jensen era Advents with the pecan wood accents? I found a pretty beat up pair of Advent Maestro II speakers cheap. I'm knee deep in restoring this and figuring might as well go all the way. I already refoamed woofer, stripped foam off front baffle and...
  10. Chet72

    Infinity Crescendo Series Rehab (CS-3006, 3007, and 3008)

    Evening, all. Hope this is the right forum, my apologies if not. Wanted to take a moment to ask a few questions and get a little feedback on my current project. Just joined AK last night... I've owned my Crescendo 3007s since 1993, when I bought them new. Apart from sporadic refoaming...
  11. Chet72

    Infinity Crescendo Series Refinish (CS-3006, CS-3007, CS-3008)

    Howdy, all! Not sure if this is the right forum, so apologies in advance if not. I wanted to take a moment to ask a few questions and get a little feedback on my current project. Just joined AK last night... I've owned my Crescendo 3007s since 1993, when I bought them new. Apart from sporadic...
  12. Chet72

    Crescendo Rehab for 3006, 3007, & 3008

    Greetings & salutations! Wanted to take a moment to ask a few questions and get a little feedback on my current project. Just joined AK last night... I've owned my Crescendo 3007s since 1993, when I bought them new. Apart from sporadic refoaming, they've served me very well. I added a few...
Back
Top Bottom