Hi
I've been working on a Tandberg 3041x, recapped and sounding really good; the problem I'm having is with the motor.
I thought it would be a case of a new belt and rebuilding the clutches, but I've been having problems, and it is actually working worse than before I removed the old pads and...
Hello
I'm currently going through recapping and testing the electronics in my Tandberg 3041x reel-to-reel. So far, I've sourced all but one capacitor replacement.
The value in question is 500uf 12v; there are two, and they are for the left and right audio amplification.
All I've been able to...
Hi
I've recently come into possession of a Tandberg 3041x reel to reel it's going to take a bit of work to cosmetically restore. It did not come with the feet for vertical standing or a top panel to hide leads, there doesn't seem to be anything available online to purchase apart from one foot...
Hello, I've recently acquired a pair each of Tandberg Hi-Fi System 15 and System 17 speakers and would love to have them serviced, to include recapping crossovers as I imagine they'd need it. I'm located between Richmond, Va and DC.
I understand these are not often found stateside, but was...
I have a Tandberg TR-2080 that has been part of my collection for awhile, and I am just now getting around to giving it the attention it deserves; it had been relegated to the project pile for the better part of two years.
The issues I had been having:
When I got the unit, the audio output had...
Good morning everyone! Thanks in advance for any info you guys can provide, this site is awesome. I recently had a full professional recap done on my Tandberg TR 2075. Not the MK II, the original 2075. The speaker pops when I turn it on, and DC voltage spikes to about 500mv for a very brief...
Greetings!
TL/DR: Could someone please help explain what abbreviations and weird deviation figures mean in the instructions below. For more detail read on!
I've been working on one of my Tandbergs TR-1020 (pretty much the same as TR-1000 or TR-1010) for the last little while. It's not an easy...
I recently picked up a pair of Tandberg 3009A monos from their original owner. They work/sound great but the seller mentioned that they haven't been serviced in approx. 20 years. I have three questions: 1) Given how well they appear to be working now, but considering how long they've gone...
Hello everyone,
This is my first post on AK. I'm new to the hi-fi world having been decidedly mid-fi most of my adult life.
I recently became taken with 3000 series Tandberg units. A few weeks ago, I picked up a 3001A tuner that needs some serious attention.
The first problem I wanted to...
I have a Tandberg TR-2080, purchased it off of my uncle (the orignal owner)....had for many years and all of the sudden the side cover got loose. They used a plastic nut holder on the rear side covers to hold the nut in place and it was shattered
I duplicated and produced a 3d printed model to...
I've been working on my TR-2055 for a while and I'm a bit stumped. The problem is a large channel imbalance in the power amp section, with the left channel being weaker than the right. There are no DC issues -- the power supply rails are fine and all DC voltages I could think of checking are...
Hello fellow AK ers I need some of the Tandberg specialist expertise
I currently have a Tandberg TR2060 paired with a set of JBL Century L100's and would like to drive more power to them so I have the opportunity to purchase a Tandberg 3036a for $300 which I have done research and the price...
Hello fellow AKs,
I got a Tandberg TR 2060 in terrible condition- without housing, some parts missing, etc. As I know how good these receivers are, I am trying my best to save it. I have and old TR 2025 that am using as parts donor for lamps' board, top, bottom and sides, etc.
The power amp...
I recently bought a Tandberg TCD330, seemingly in excellent condition. The seller told me the unit had been recapped, cleaned and lubricated around 3 years ago by a top local audio technician and then shortly afterwards calibrated and aligned by Tandberg Zentral Service in Germany. I have the...
Hello guys,
I am working on a Tandberg tuner TPT3001 and I need some help.
When I got the unit it was NOT working at all.
The tuning wheel and the other parts of the tuning system were all stuck.
The tuning wheel tip was completely corroded as well as its copper connection on the PCB. The...
I've recently revived a TR-2075 and it sounds great. However, I have a loud pop that visibly moves the woofers when I turn the receiver off without disengaging the speakers via the speaker selector switch.
This is a non-issue for me, since I'm used to turning down the volume and turning the...
My poor old TR2055 is in need of a replacement relay I think. I believe this is an early series unit. I noticed the other day that the right channel was cutting out after the unit heated up. I at first thought about dirty contacts so I cleaned the speaker selection switch as well as volume and...
Well I'm back with another head scratcher! My friend brought me a tandberg 2080 to try to get restored and up and running for him. I tried to warn him that I'm more familiar with tube stuff and have only done basic recaps on solid state gear but he wouldnt listen!
So we this thing arrived on...
Hi, I have a TR2040 that has the balance pot shaft off. The axle (grey plastic center bit) is flat with the metal housing. I tried to glue a bit of plastic to the grey center bit but it won't stick when turned.
I would like to replace it with a new one. What specs should a replacement balance...
I recently acquired A very nice condition and well working Tandberg Solvsuper 10. It is a late model with power button and AFC. produces 6-8 watts per channel, with 30 watts peak. I'm running it to RadioShack Minimus 7 pair and a Theater Solutions Sub8S with very good results in a small space...
Hello- as luck would have it during the course of a move one of the speaker binding posts on my Tandberg 3006A broke and now needs replacement. I'm looking to see if anyone knows what a good
replacement would be that would work on this unit. Any suggestions?
I have this deck, and it plays and winds tape, for the most part.
Issue I have is the take up motor, in play mode, will stop for a fraction of a second. I hear a click at that moment, but I am unsure it's coming from the motor-it seems to be generated from the hub of the cassette. When the...
My lady's Tandberg TR 2055 Receiver is sounding not enjoyable now and she has given me the green light to try to fix the issue with this community's help, please. I am listening to White Rabbit on it now through a Macbook and the bass and treble sound good but most tracks more in the midrange...
Here is my Tandberg TR-2040 that had a lightning strike into the antenna terminals, happened back in the 1980's according to the person I bought it from. They had a whole long story on that. The lightning seems to have taken out the tuner, everything else still works. Is it possible to repair...