Dagobah
New Member
My father recently gifted me his Marantz 4300 and I'd like to make a case for it. I just need some measurements from the stock case.
Here's what I need:
Looking at this case on ebay, it appears the unit slides in from the front, so wondering what the width of that lip (rabbet) is. My 4300 also has the SQA-1 logic adaptor, so I'll need to make that cutout on the bottom. As for venting, I'm planning on using a CNC to cut ample vent holes in a similar position as the stock case's black mesh.
I'll be building this out of solid walnut.
Here's what I need:
- Exterior width/height/depth
- Interior width/height/depth (or just the thickness of the material)
- Dimensions and placement of the venting screen on the top
- The width of the rabbet cut into the front
- Dimensions and placement of the logic board cutout on the bottom
- Placements of the feet holes
Looking at this case on ebay, it appears the unit slides in from the front, so wondering what the width of that lip (rabbet) is. My 4300 also has the SQA-1 logic adaptor, so I'll need to make that cutout on the bottom. As for venting, I'm planning on using a CNC to cut ample vent holes in a similar position as the stock case's black mesh.
I'll be building this out of solid walnut.
