are my advent crosservers wrecked

[harmkard330guy]

It sometimes cuts out on my advents and then i wiggle a wire that goes to the reciever and it turns off and it is all hooked up the right way :worried: and i just dont know what to do.

 

[gatemplin]

It doesn't sound like they are wrecked. We need more info, what model, what wire? The speaker wires? Maybe you just have a loose binding post. Maybe a speaker termination is coming loose etc. If I were you I would open them up and have a look see.

 

[harmkard330guy]

thanks i will try it

i will try and see if my binding posts are loose it is fay wire and smaller advents

 

[harmkard330guy]

nope they arent loose :worried:

 

[GordonW]

Try some different speaker wires between the amp and the speaker cabinet. If the existing wire has an internal break or is corroded, this kind of thing can happen.

Regards,
Gordon.

 

[harmkard330guy]

thanks i will try it

 

[merrylander]

I have a pair of Advent xovers, numbered A4nnnn so I am not sure which model they belong to, but if they would fix your problem you can have them for shipping.

Rob

 

[harmkard330guy]

no thanks i found out what the problem is bad wires