8xlaxx
Have you ever seen a spleen that large?
A CL find that I brought home today. It performs very well and sounds absolutely fantastic. No heavy scratches on the face but there is wood veneer damage on the corners and along the bottom that will need attention.
I pulled the cover and blew out the dust with air and fine brush, staying away from the laser. I lubed the black, sliding, plastic rails on top and the round metal rails that hold/track the laser w/ Deoxit Fader Lube,... used a cotton tipped applicator, not sprayed.
Is there any other mechanical maintenance items that one should address with these units?
Thank you for reading the thread. Recommendations / suggestions are most welcome.
I pulled the cover and blew out the dust with air and fine brush, staying away from the laser. I lubed the black, sliding, plastic rails on top and the round metal rails that hold/track the laser w/ Deoxit Fader Lube,... used a cotton tipped applicator, not sprayed.
Is there any other mechanical maintenance items that one should address with these units?
Thank you for reading the thread. Recommendations / suggestions are most welcome.
